Hp C-Class Blade Suv Cable - HP ProLiant BL495c G6 User Manual

Accessing the redundant ROM
If the system ROM is corrupted, the system automatically switches to the redundant ROM in most cases. If
the system does not automatically switch to the redundant ROM, perform the following steps:
Power down the server blade (on page 11).
1.
Remove the server blade (on page 12).
2.
Remove the access panel (on page 12).
3.
Change positions 1, 5, and 6 of the system maintenance switch to on.
4.
Install the access panel (on page 13).
5.
Install the server blade in the enclosure and power up the server blade.
6.
After the system beeps, repeat steps 1 through 3.
7.
Change positions 1, 5, and 6 of system maintenance switch to off.
8.
Repeat steps 5 and 6.
9.
If both the current and backup versions of the ROM are corrupt, return the system board for a service
replacement.
To switch to the backup ROM when the System ROM is not corrupt, use RBSU.

HP c-Class Blade SUV Cable

Item Connector
1 Server blade
2 Video
3 USB
4 Serial
Description
For connecting to the SUV connector on the
server blade front panel
For connecting a video monitor
For connecting up to two USB devices
For trained personnel to connect a null modem
serial cable and perform advanced diagnostic
procedures
Component identification 10