Vesda Data Format For Command 10 (Update Display Status) - FieldServer FS-8700-43 VESDA Instruction Manual

FS-8700-43 VESDA Driver Manual
4.5.5.
This request returns the Current Display Status in a split data array (2 data arrays of
different type in one map descriptor). The format for the data is as follows:
Data Arrays 1
Column Title
Data_Array_Name
Data_Format
Data_Array_Length Number of Data Objects
Data Arrays 2
Column Title
Data_Array_Name
Data_Format
Data_Array_Length Number of Data Objects
Client Side Map Descriptors
Column Title
Map_Descriptor_Name Name of this Map Descriptor
Data_Array_Location
Function
Node_Name
Data_Type
Length
Address
Command
Network
Zone
Sector
DA_Bit_Name
DA_Bit_offset
DA_Float_Name
DA_Float_offset
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com

VESDA data format for command 10 (Update Display Status)

Function
Provide name for Data
Array
Provides data format
Function
Provide name for Data
Array
Provides data format
Function
Starting location in Data
Array
Function of Client Map
Descriptor
Name of Node to fetch data
from
Data type
Length of Map Descriptor
Starting address of read
block
The command id
The network number
The zone number
The sector number
Name of Data Array where
data is to be stored in the
FieldServer.
Starting location in Data
Array.
Name of Data Array where
data is to be stored in the
FieldServer.
Starting location in Data
Array.
Page 14 of 18
Legal Values
Up to 15 alphanumeric
characters
BIT
32
Legal Values
Up to 15 alphanumeric
characters
FLOAT
32 (only first position used)
Legal Values
Up to 32 alphanumeric
characters
0
RDBC
One of the node names
specified in "Client Node
Descriptor" above
Dig_input
32
0
10
1-255
1-255
1-255
Data Array 1 name
0
Data Array 2 name
0