Common Applications And Examples; Vesda Data Format For Command 1 (Set Operation) - FieldServer FS-8700-43 VESDA Instruction Manual

FS-8700-43 VESDA Driver Manual
4.5.

Common Applications and Examples

Each Command on the VESDA has a particular data format.
4.5.1.
This command is mandatory as it turns the VESDA system into a master slave
relationship and is of type BIT. The content of the data is irrelevant. The format for the
data is as follows:
Data Arrays
Column Title
Data_Array_Name
Data_Format
Data_Array_Length
Client Side Map Descriptors
Column Title
Map_Descriptor_Name
Data_Array_Name
Data_Array_Location
Function
Node_Name
Data_Type
Length
Address
Command
Network
Zone
Sector
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com

VESDA data format for command 1 (Set Operation)

Function
Provide name for Data Array
Provides data format
Number of Data Objects
Name of this Map
Descriptor
Name of Data Array where
data is to be stored in the
FieldServer
Starting location in Data
Array
Function of Client Map
Descriptor.
Name of Node to fetch data
from
Data type
Length of Map Descriptor
Starting address of read
block
The command id as given in
the notes.
The network number
The zone number
The sector number
Up to 15 alphanumeric
characters
BIT
8
Function
Up to 32 alphanumeric
characters
As above.
0
WRBC, WRBX
One of the node names
specified in "Client Node
Descriptor" above
dig_output
8
0
1
1-255
1-255
1-255
Page 10 of 18
Legal Values
Legal Values