Vesda Data Format For Command 4 (Zone Update) - FieldServer FS-8700-43 VESDA Instruction Manual

FS-8700-43 VESDA Driver Manual
4.5.2.
This request returns the Current Zone Status in a BIT data array. The format for the data
is as follows:
Data Arrays
Column Title
Data_Array_Name
Data_Format
Data_Array_Length
Client Side Map Descriptors
Column Title
Map_Descriptor_Name
Data_Array_Name
Data_Array_Location
Function
Node_Name
Data_Type
Length
Address
Command
Network
Zone
Sector
Data Block Description
BIT offset
0
1
2
3
4
5
6
7
2
1 indicates TRUE; 0 indicates FALSE
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com

VESDA data format for command 4 (Zone Update)

Function
Provide name for Data Array
Provides data format
Number of Data Objects
Function
Name of this Map
Descriptor
Name of Data Array where
data is to be stored in the
FieldServer
Starting location in Data
Array
Function of Client Map
Descriptor.
Name of Node to fetch data
from
Data type
Length of Map Descriptor
Starting address of read
block
The command id as given in
the notes.
The network number
The zone number
The sector number
2
Function
Other Zone Info
Scanning
Autolearning
Normalising
Isolated
Fault Filter
Fault Airflow
Fault Network
Legal Values
Up to 15 alphanumeric
characters
BIT
1 - 16
Legal Values
Up to 32 alphanumeric
characters
As above.
0 -16
RDBC
One of the node names
specified in "Client Node
Descriptor" above
dig_input
1-16 (must not overflow the
data array)
1-16
4
1-255
1-255
1-255
BIT offset Function
8 Fault Power
9 Fault Urgent
10 Fault Zone
11 Fault System
12 Alarm Fire2
13 Alarm Fire1
14 Alarm Action
15 Alarm Alert
Page 11 of 18