Vesda Data Format For Command 6 (Remote Input) - FieldServer FS-8700-43 VESDA Instruction Manual

FS-8700-43 VESDA Driver Manual
4.5.3.
This command sends the Remote Input in a BIT data array.
Data Array
Column Title
Data_Array_Name
Data_Format
Data_Array_Length Number of Data Objects
Client Map Descriptors
Column Title
Map_Descriptor_Name
Data_Array_Name
Data_Array_Location
Function
Node_Name
Data_Type
Length
Address
Command
Network
Zone
Sector
Data Block Description
BIT offset
0
1
2
3
4
5
6
7
3
1 indicates TRUE; 0 indicates FALSE
4
ONLY 1 OF THE 8 BITS MAY BE SET IN ONE COMMAND
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com

VESDA data format for command 6 (Remote Input)

Function
Provide name for Data
Array
Provides data format
Name of this Map
Descriptor
Name of Data Array where
data is to be stored in the
FieldServer
Starting location in Data
Array
Function of Client Map
Descriptor.
Name of Node to fetch data
from
Data type
Length of Map Descriptor
Starting address of read
block
The command id as given in
the notes.
The network number
The zone number
The sector number
34
Stop Test
Scan Start
Start Test
Silence
De-Isolate
Isolate
Reset
Reserved
Legal Values
Up to 32 alphanumeric
characters
BIT
1 - 8
Function
Up to 32 alphanumeric
characters
As above.
0 –8
WRBX
One of the node names
specified in "Client Node
Descriptor" above
dig_output
1-8 (must not overflow the
data array)
1-8
6
1-255
1-255
1-255
Function
Page 12 of 18
Legal Values