Table of Contents
Advertisement
FS-8700-112 FCI 7100 Series Driver Manual
Stat
#define FCI_7100_STAT_RCVD_BYTES
#define
FCI_7100_STAT_PARSED_NO_ERRS_EXCLD_RESET
#define FCI_7100_STAT_PARSED_NO_ERRS_RESET
#define FCI_7100_STAT_PARSED_NO_ACTION
#define FCI_7100_STAT_PARSED_WITH_ERRS
#define FCI_7100_STAT_INHIBIT_RESET
#define FCI_7100_STAT_INHIBIT_RESET_DA_PUT
#define FCI_7100_STAT_INHIBIT_RESET_WHILE
#define FCI_7100_STAT_NODE_INFO_MSG
#define
FCI_7100_STAT_NO_PLACE_TO_STORE_NODE
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
Offset
Description
Increments
each
character is recieved from the
panel. The bytes are only added
12
when a message terminator is
received. Thus this count is
equiv to the byte count in all
FCI_7100_STAT_RCVD_MSGS
Increments
each
message
is
13
errors.
Excludes
Messages
Increments each time a reset
14
message
is
errors.
Increments
each
message is parsed with no
15
errors but the nature of the
message doesnt require data to
be stored. (eg empty msg lines)
Increments
each
16
message produces an error
when parsed.
Set
to
1
to
17
altogether
Set to 1 to inhibit resets from
18
clearing arrays
Set to 1 to inhibit reset function
19
from looping thru MD's
Increments
each
20
message with node information
is received
Increments each time an event
needs to be stored, the event
contains node info and the node
21
cannot be found so there is no
match and the message was
discarded.
Page 23 of 24
time
a
time
a
parsed
without
Reset
parsed
without
time
a
time
a
inhibit
resets
time
a
Advertisement
Table of Contents
