Midi String - Peavey PC1600X User Manual

6. Repeat the above steps as necessary for each channel.
7. With parameters deselected (press exit) press the up direction button to access the screen recall screen.
SCENE RECALL
A scene can be part of the set-up string. When this condition exists, any time the preset is recalled the scene
data will be transmitted. Since the memory area for scene storage is fixed and separate from the preset
memory, this function provides an efficient way to transmit data. Previously this information would have
been stored in the set-up MIDI string which would have been both tie and memory intensive. Note that when
a scene is selected for the result scene, its associated preset is indicated in the lower left corner.

MIDI STRING

1. With parameters deselected (press EXIT). Press the up direction button to access the string on the
following page:
2. Edit the MIDI string just like a button string. The left/right direction buttons are used to select a specific
byte while the Up/Down direction buttons and the data wheel are used to edit a digit of the string. Pressing
the up button when between bytes inserts a new byte and pressing the down button deletes a byte. If no bytes
are displaced, no string will be sent.
LEARN MODE
If a system exclusive message is received while a set-up string is being edited (the cursor must be visible) the
PC1600X will automatically replace the existing set-up string with the system exclusive message received.
Setup: Scene
[P;--] Off
Setup: String
44
Peavey PC1600X User Manual (rev-h)