Device Number And Note Recording Receive Channel - Peavey PC1600X User Manual

ASSIGNING FOOTSWITCHES
A footswitch can be assigned globally to duplicate most of the front panel buttons
1. on the PC1600x. Examples of footswitch uses include:
2. Changing presets on the PC1600x by assigning the footswitches to "lnc." or "Dec."
3. Saving and sending scenes by assigning a footswitch to copy the "Enter" button.
4. Starting and stopping a sequencer by assigning a button to toggle between Start
and Stop messages and assigning the footswitch to copy that button.
5. Sending note messages to drum machines allows drum Darts to be played with a
footswitch. Assign a button to send a note message and assign a footswitch to copy that button.
6. Muting an effect by duplicating a button message that mutes a fader.
To assign a footswitch:
1. Press the Utility button.
2. Use the Up/Down buttons or Data Wheel to access the following page:
3. Select the correct footswitch field using the left and right direction buttons.
4. Use the Up/Down buttons or the data wheel to select which button the footswitch will emulate.
The polarity of the footswitch is automatically determined on power-up. If a footswitch is installed after the
PC1600X is powered up, or if the footswitch is depressed during power-up, the polarity of the footswitch
may be incorrect. Simply switch the power off, wait a few seconds and turn the power back on with the
footswitch installed but not pressed. This will correct the polarity.
Note:
Assigning a footswitch will automatically disable the CV 2 input.
DEVICE NUMBER - NOTE RECORDING/RECEIVE CHANNEL
This screen allows the assignment of a global device ID. Many MIDI products use system exclusive
command strings that have a device number as one of the bites. These numbers are used to differentiate the
unit from an identical unit on the same MIDI stream. Being able to chance these numbers globally allows
you to use one set of PC1600X presets for multiple units of the same product. Instead of hard coding these
values into the strings, it is possible to designate a "dv" (device numbers byte in the strings. then adjust this
parameter to function as the Global setting.
UTIL: Ftsw1 Ftsw2
Off Off
UTIL: DevNum RecChn
000 001
21
Peavey PC1600X User Manual (rev-h)