Peavey PC1600X User Manual page 33

The zero after the C will get replaced by the ChOut setting in the Utility menu.
LEARN MODE
If a system exclusive message is received while a fader string is being edited (the underline cursor must be
presents. the PC1600x will automatically replace the existing fader string with the system exclusive message
received.
SAVING YOUR EDITS
Use the following steps to save your edits:
1. Press the Edit button.
2. Use the data wheel or no/down buttons to scroll to the last option: Name/save preset.
3. Press "Enter".
4. To rename, use the left/right buttons to select character positions and the Up/Down buttons to edit the
character. Note: Faders also can be used to select character positions.
5. Press "Enter".
6. Choose the destination for the save with the Up/Down buttons or the data wheel.
7. Press "Enter" to save to the location displaced at the bottom of the display.
To return to the main page at any time, press Exit several times until the main page is reached. If changes
were made to the preset, the preset number will be replaced with "**" This is an indication that the preset in
the edit buffer has been modified but not saved. Press Edit to return to the Edit mode if the changes are to be
saved.
Press up or down from the main page to leave this preset. This will cause any changes that were made to be
discarded.
Note: Edits which were discarded can be recovered from the main page if no other preset has been edited
seven after a Dower down). Increment the preset number above preset 49 and the preset number is replaced
by "**" Pressing Edit returns to the Edit mode with the edit buffer exactly as it was last time the Edit mode
was exited.
FDR01: String
C0-gc pr
33
Peavey PC1600X User Manual (rev-h)