Peavey PC1600X User Manual page 27

EDIT INTRODUCTION
Access the main edit maple at any time by pressing the Edit button. The field on this page selects the item to
be edited. The following choices are available:
• Fader 01 - Fader 16
• CV 1 & CV 2
• Button 01 - Button 16
• Data wheel
• Set-up string
• Name/save preset
The up and down direction buttons or the data wheel can be used to scroll through the above choices.
Moving any Fader, CV input or Button will cause that item to be displayed, when the desired item is
displayed, press the "Enter" button to access the parameters specific to that item.
Shortcut: For a time-saving shortcut, try moving a fader, CV input button or the Data Wheel while holding
the edit button. Releasing the edit button will immediately access the selected item. "Sideways/Navigation"
is possible when switching to a device that is set to the same function. This will allow you to jump to a
different device and be at the same screen as the previous device.
NAMING & SAVING A PRESET
Go to the Edit menu. Use the Data Wheel or Up/Down arrow keys to move to the "Name/save Prs" page,
Press "ENTER", Use the Left/Right direction buttons to select the character in the name and the Up/Down
buttons or data wheel to edit the character. To make editing faster, each fader edits a different character of
the name. Pressing "ENTER" from this page accesses the "SAVE TO" page. The bottom line of this page
displays the number and name of the destination preset to be overwritten, The data wheel and Up/Down
buttons maybe used to change the storage destination. Pressing the "Enter" button from this page will save
the preset and return to the main page, by pressing the Exit button, you will be returned to the "Edit name"
page.
EXITING EDIT MODE
To return to the main page at any time, Press Exit several times until the main page is reached. If changes
were made to the preset, the preset number will be replaced with "**" This is an indication that the preset in
the edit buffer has been modified but not saved. Press Edit to return to the Edit mode if the chances are to be
saved.
Changing presets results in the following display:
Press "ENTER" to confirm that you don't want to save your edits. Press Up/Down from the main page to
leave this preset. This will cause any chances that were made to be discarded. However, if you don't edit
another preset, recovery is possible. Edits which were discarded can be recovered from the main page.
Increment the preset number above preset 49 and the preset number is replaced by "**" Pressing Edit returns
to the Edit mode with the edit buffer exactly as it was last time the Edit mode was exited (even if the unit had
been Dowered down. Amazing!)
[Enter]
Exit without saving?
27
Peavey PC1600X User Manual (rev-h)