Preset Setup String Scene Editing - Peavey PC1600X User Manual

Note:
A scene saves the current position of each fader and CV input. Data wheel movements and soloing/muting a
fader have no effect on the data stored in a scene or sent by a scene.
SCENE INITIALIZE
Allows an existing scene to be initialized which disassociates it with any preset, therefore making it send
nothing.
This screen is displayed as follows:
1. Press the Scene button until the following page is displaced:
2. Use the Up/Down direction buttons or the data wheel to select a scene, Note: The associated preset is
indicated in parentheses in the lower left corner.
3. Press the "Enter" button to initialize the scene. The scene number will automatically increment to the next
scene, allowing several scenes to be initialized quickly.
Pressing "ENTER" will clear any values recorded by a stored scene. After initialization, the preset link will
change to: "[p:---]" Of course, if at first you see "[p:---]" the scene is already initialized.
PRESET SET-UP STRING SCENE EDITING
A scene can be assigned to each preset, when this condition exists, any time the preset is recalled, the scene
data will be transmitted. Since the memory area for scene storage is fixed and separate from the preset
memory, this function provides an efficient way to transmit data. For more information, see the preset set-up
string info on page 32.
SCENE: INITIALIZED!!!
[p:---] 00 [Enter]
25
Peavey PC1600X User Manual (rev-h)