About Presets And Editing - Peavey PC1600X User Manual

------------------------------------------------------------------------------
Each preset contains a variety of information:
*16 fader messages
*16 button messages
*2 CV messages
*A group of "set-up" messages that are transmitted each time a preset is selected (recalled).
*Data Wheel Link
Fifty unique presets are available for editing, however we have pre-programmed each of them with a variety
of sample presets to give you application examples.
UNIT INITIALIZATION:
Initialization restores all 50 factor presets (and erases any settings you might have made), resets the global
settings and deletes any programmed scene settings. If you're sure you want to do this, use the following
procedure:
1. Turn Power Off.
2. Hold down the Utility and Enter buttons while turning the Power On.
3. "Memory initialized" is displayed.
Note:
It is not possible to undo the initialization procedure.
INDIVIDUAL PRESET INITIALIZATION
When creating new presets, it is perfectly fine to edit existing presets. However, if you prefer to start with a
"Clean Slate" a preset initialization function is available in the utility menu.
1. Press the Utility button.
2. Use the Up/Down buttons to move to the following screen:
3. Select the preset number you wish to reinitialize.
4. Press "ENTER" then you will be asked. "ARE YOU SURE ?"
5. Press "ENTER" again to confirm initialization. The preset will be renamed "--initialized--".
Note:
ALL presets share the same block of memory, which gets divided among the available presets. This
utility is very handy for freeing up memory since you can reinitialize presets that are not needed. The
Memory Usage page is also in the Utility Menu.
UTIL: Init a Preset?
00 Volume with mute
26
Peavey PC1600X User Manual (rev-h)
About Presets & Editing