Individual Preset Initialization; Memory Usage - Peavey PC1600X User Manual

When the type is set to "Notes" Note On messages will emulate a button press, while Note Off messages
(including Note On with velocity = 0, of course) will emulate a button release. In "PrgCh" mode, . Program
Chance messages will emulate a button press immediately followed by the release, (You probably won't find
much use for a Prs/Rls string when emulating in PrgCh mode - use normal or toggled strings instead.)

INDIVIDUAL PRESET INITIALIZATION

When creating new presets, it is perfectly fine to edit existing presets. However if you prefer to start with a
"Clean Slate" a preset initialization function is available in the utility menu:
1. Press the Utility button
2. Use the Up/Down buttons to move to the following screen:
3. Select the Preset number you wish to re-initialize.
4. Press "ENTER", then you will be asked. "ARE YOU SURE"
5. Press "ENTER" again to confirm initialization. The preset will be renamed "--initialized--"
Note:
All presets share the same block of memory, which gets divided among the available presets. This utility is
very handy for freeing up memory since you can reinitialize presets that are not needed.

MEMORY USAGE

PC1600x presets are dynamically allocated, allowing a single preset to be very large when necessary. If too
many larvae presets are created, the PC1600x will run out of preset memory. When this occurs, some
memory must be freed by removing (reinitializing) or re-defining presets. The memory usage display help
determine which presets to modify. To use the memory usage display:
1. Press the Utility button.
2. Use the Up/Down buttons or data wheel to access the following page:
4. Use the Up/Down buttons or the data wheel to view the amount of free memory and the amount of
memory used by each preset.
Note:
The names of faders, CV inputs and buttons only use memory per character. Therefore shortening the names
frees up memory. Preset names however have a fixed length so this wouldn't apply.
BUTN: Type CH Start
REMT Off 01 000
UTIL: Init a Preset
00 Volume with mute
UTIL: Memory
Free: 6324
23
Peavey PC1600X User Manual (rev-h)