D-Link xStack DGS-3400 Series User Manual page 175

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
The following parameters can be set, for IP:
Parameter
Profile ID (1-6)
Type
Class
Flow Label
Source IPv6 Mask
Destination IPv6
Mask
Click Apply to implement changes made.
To view the settings for a created profile, click its corresponding
window.
Figure 8- 7. Access Profile Configuration window (IPv6)
Description
Type in a unique identifier number for this profile set. This value can be set from 1 - 6.
Select profile based on Ethernet (MAC Address), IP or IPv6 address. This will change the
menu according to the requirements for the type of profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header.
Select IP to instruct the Switch to examine the IP address in each frame's header.
Select IPv6 to instruct the Switch to examine the IPv6 address in each frame's header.
Checking this field will instruct the Switch to examine the class field of the IPv6 header. This
class field is a part of the packet header that is similar to the Type of Service (ToS) or
Precedence bits field in IPv4.
Checking this field will instruct the Switch to examine the flow label field of the IPv6 header.
This flow label field is used by a source to label sequences of packets such as non-default
quality of service or real time service packets.
The user may specify an IP address mask for the source IPv6 address by checking the
corresponding box and entering the IP address mask.
The user may specify an IP address mask for the destination IPv6 address by checking the
corresponding box and entering the IP address mask.
Figure 8- 8. Access Profile Entry Display for IPv6
button in the Access Profile table, revealing the following
161