Trust Host - D-Link xStack DGS-3400 Series User Manual

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch

Trust Host

Up to four trusted-host secure IP addresses may be configured and used for remote Switch management. It should be noted that if
one or more trusted hosts are enabled, the Switch will immediately accept remote instructions from only the specified IP address
or addresses. If you enable this feature, be sure to first enter the IP address of the station you are currently using.
Figure 9- 14. Security IP menu for Trusted Host configuration
To configure secure IP addresses for trusted host management of the Switch, type the IP address of the station you are currently
using in the first field as well as up to three additional IP addresses of trusted hosts. Click the Apply button to assign trusted host
status to the IP addresses. This goes into effect immediately. Click Delete All to remove all configured trusted hosts from this
switch.
194