xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
STP Instance Settings
The following window displays MSTIs currently set on the Switch. To view the following table, click Layer 2 Features >
Spanning Tree > STP Instance Settings:
The following information is displayed:
Parameter
Instance Type
Instance Status
Instance Priority
Click Apply to implement changes made.
Click the Modify button to change the priority of the MSTI. This will open the Instance ID Settings window to configure.
Parameter
Description
MSTI ID
Displays the MSTI ID of the instance being Modified. An entry of 0 in this field denotes the CIST
(default MSTI).
Type
The Type field in this window will be permanently set to Set Priority Only.
Priority (0-61440)
Enter the new priority in the Priority field
Click Apply to implement the new priority setting.
Figure 7- 37. STP Instance Table
Description
Displays the instance type(s) currently configured on the Switch. Each instance type is
classified by a MSTI ID. CIST refers to the default MSTI configuration set on the Switch.
Displays the current status of the corresponding MSTI ID
Displays the priority of the corresponding MSTI ID. The lowest priority will be the root bridge.
Figure 7- 38. STP Instance Settings Modify
144