Setup; Ac Power; Ac Plug - Chauvet COLORado 2-Quad Zoom Tour User Manual

Setup

3. S
ETUP

AC Power

AC Plug

-6-
Each COLORado™ 2-Quad Zoom Tour has an auto-ranging power supply that works with an
input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for
each COLORado™ 2-Quad Zoom Tour, refer to the label affixed to the product. You can also
refer to the Technical Specifications
The listed current rating indicates the maximum current draw during normal operation. For more
information, you may download Sizing Circuit Breakers from the CHAUVET® website:
www.chauvetlighting.com/download/pro.
Always connect this product to a protected circuit with an appropriate electrical ground
to avoid the risk of electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
The COLORado™ 2-Quad Zoom Tour comes with a power input cord terminated with a
Neutrik® powerCON® connector on one end and an Edison plug on the other end
(U.S. market). If the power input cord that came with your product has no plug, or if you need to
change the Edison plug, use the table below to wire the new plug.
Connection
AC Live
AC Neutral
AC Ground
chart in this manual.
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow
Brown Yellow or Brass
Blue
Green/Yellow
COLORado™ 2-Quad Zoom Tour User Manual Rev. 1
Screw Color
Silver
Green