Setup; Ac Power; Ac Plug; Fuse Replacement - Chauvet COLORdash Par-Quad 18 User Manual

Setup

3. Setup

AC Power

AC Plug

Fuse Replacement

-6-
Each COLORdash™ Par-Quad 18 has an auto-ranging power supply that works with an
input voltage range of 100~240 VAC, 50/60 Hz. To determine the power requirements
for each COLORdash™ Par-Quad 18, refer to the label affixed to the product. You can
also refer to the Technical Specifications
The listed current rating indicates the maximum current draw during normal operation.
For more information, download Sizing Circuit Breakers from the Chauvet website:
www.chauvetprofessional.com.
·
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
·
To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by
unplugging it.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
The COLORdash™ Par-Quad 18 comes with a power input cord terminated with a
Neutrik® powerCON® A connector on one end and an Edison plug on the other end
(U.S. market). If the power input cord that came with your product has no plug, or if you
need to change the Edison plug, use the table below to wire the new plug.
Connection
AC Live
AC Neutral
AC Ground
Make sure to disconnect the product's power cord before replacing a blown fuse.
Always replace with a fuse of the same type and rating.
1. Disconnect the product from power.
2. Using a flat head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating
(T 3.15 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
chart in this manual.
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
Screw Color
Brown Yellow or Brass
Blue
COLORdash™ Par-Quad 18 User Manual Rev. 5
Silver
Green