Queue Bandwidth Control Settings - D-Link xStack Reference Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch WEB UI Reference Guide
Click Apply to implement the settings made.

Queue Bandwidth Control Settings

The queue bandwidth control settings are used to place a ceiling on the transmitting data rates for the priority queue of
the port.
To view this window, click QoS > Queue Bandwidth Control Settings:
NOTE: Traffic Control cannot be implemented on ports that are set for
Link Aggregation (Port Trunking).
NOTE: Ports that are in the Shutdown rest mode will be seen as
Discarding in Spanning Tree windows and implementations though these
ports will still be forwarding BPDUs to the Switch's CPU.
NOTE: Ports that are in Shutdown rest mode will be seen as link down in
all windows and screens until the user recovers these ports.
Figure 4 - 4. Queue Bandwidth Control Settings window
130