Brickcom CB-101A Series User Manual page 32

6. If the camera supports the EasyLink
displayed. Otherwise, this page will not be shown. *If desired, click <Skip> to
skip this setting.
EasyLink is a unique Brickcom function which allows users to assign a unique EasyLink
TM
name to their network camera's IP address. There is no need to configure the router to open
up ports or remember hard-to-memorize IP addresses.
[uniqueEasyLinkname].mybrickcom.com to view the camera's web GUI and live view.
1. Enter a unique EasyLink name whose length must be between 5-32 characters.
2. When finished, click the arrow button to continue.
NOTE - See page 44 for more details about the EasyLink function.
- 25 -
TM
function, the following page will be
Users can log onto