Comfort Adjustments; Armrest Width Adjustment - Pride Mobility JET 1HD Owner's Manual

V I . C O M F O R T

COMFORT ADJUSTMENTS

After you have become familiar with your Jet’s
operation, you may find the need to adjust the
seat. There are some adjustments you can make
to increase your comfort such as seat height and
angle, armrest height and angle, footrest height
and angle, and joystick position.
WARNING! If your Jet was con-
figured at your authorized Pride
provider, please consult your
healthcare professional before
changing the seat position or
making any other adjustment.
Some adjustments may de-
grade you Jet’s performance
and safety by changing its cen-
ter of gravity.
Seat Height
You can change the seat height manually.
To change the seat height:
1. Remove the seat. See VII. “Disassembly.”
2. Remove the nut and bolt from the seat post.
See figure 13.
3. Raise or lower the seat postl to the desired
position.
4. Install the nut and bolt into the seat post.
5. Install the seat.

Armrest Width Adjustment

To change the armrest width:
1. Locate the two setscrews on the armrest re-
ceiver bracket. See figure 14.
2. Loosen the setscrews and slide the armrests
in or out for the desired width.
3. Tighten the setscrews.
24 www.pridemobility.com
A D J U S T M E N T S
NUT AND BOLT
Figure 13. Seat Post Nut And Bolt
LOOSEN SETSCREW TO
CHANGE ARMREST HEIGHT.
Figure 14. Armrest Width and Height
LOOSEN SETSCREWS
TO MOVE ARMREST.
Jet1 HD/Rev H/Feb03