Wall Mounting; Wall Mounting Bracket Installation - Viessmann VITODENS 100-W WB1B Series Installation And Service Instructions Manual

Boiler Connections

Wall Mounting

Wall mounting bracket installation

Fig. 8
Legend
A Mounting template
B Finished floor level
Dimensions
a 12" / 300 mm
b min. 45" / 1143 mm
16
The Vitodens 100-W can be
wall-mounted on
a brick/concrete wall
g
wood studs
g
metal studs
g
Following are the installation
instructions for the mounting
bracket on each material. Skip to the
installation instructions applicable to
your installation requirements.
CAUTION
Whichever mounting method is
used, ensure that the bracket
is tightly and securely fastened
to wall. Failure to secure boiler
properly could cause boiler to
loosen, posing a severe safety
hazard.
Installation of mounting bracket on
brick/concrete wall:
1. Drill holes (Ø e"/10 mm), using
mounting template supplied with
the boiler.
2. Align wall mounting bracket and
attach to wall with the screws and
plastic anchors supplied.