Viessmann VITODENS 100-W WB1B Series Installation And Service Instructions Manual page 17

Wall Mounting
(continued)
Mounting bracket installation (continued)
Fig. 9 Installation of mounting bracket
Fig. 10 Installation of mounting bracket on wood studs
Fig. 11 Installation of mounting bracket on metal studs
Boiler Connections
Installation of mounting bracket on
wood and metal studs
To mount the Vitodens 100-W boiler
on wood or metal studs, install
mounting bracket on wall as shown
on previous page. Refer to drawings
on the left and below for more
detailed installation information.
Install mounting bracket on wood
studs as per illustration. Drill
pilot holes to insert mounting bolts.
Ensure that holes are located in the
center of each wood stud.
Install mounting bracket on metal
studs as per illustration. Drill f" pilot
holes to insert mounting bolts. Ensure
that holes are located in the center
of each metal stud. Secure mounting
bracket with bolts to metal studs as
shown.
3
/ "
16
17