Viessmann VITODENS 100-W WB1B Series Installation And Service Instructions Manual page 81

Parts List
Parts
001 Heat exchanger assly, ASME
002 Heat exchanger connection
pipe (supply)
003 Heat exchanger connection
pipe (return)
004 Spring clips (set)
006 Fastener set (return pipe)
009 Vent pipe adaptor
010 P-Trap
011 Gasket for flue gases
012 Air intake cover
013 Air intake cap
014 Test port cap (set of 2)
Start-up and Maintenance
015 Wall-mount bracket
016 Combustion chamber refractory
017 Condensate pipe
018 Condensate hose
019 Gasket for air intake
020 Guide rails (set of 2)
021 Clip d=8 (set of 5)
023 Connector retaining clip
(set of 2)
024 Sealing grommet, DN60
025 O-ring set for heat exchanger,
21 x 3 mm
026 Sealing grommet set
Air vent with shut-off base, e"
027
028 Supply/return o-ring set,
18 x 3 mm
Start-up and Maintenance
029 Support bracket set
for heat exchanger
030 Heating supply connection pipe
031 Heating return connection pipe
082 Fixed high limit, 99º C
083 Boiler sensor
084 Flue gas sensor
088 Flow switch VK315M
B ASME Rating plate
Additional Information
81