Ir Repeater (For Vr-6070 Only); Connecting The Antennas - Kenwood VR-6070 Instruction Manual

Setting up the system
Connecting the
RF
antenna and externallR Repeater
(For VR-6010 only)
The remote control for this receiver has the RF (radio frequency) and IR (infrared rays) transmission function. IR repeaters enables you to control
components located in cabinets or behind glass doors. You can enJoy a wider remote control signal range by placing the RF antenna and IR repeater away
from the receiver
KENWOOD components (except DVD player): System control
Other components: (Registering setup codes) IR REPEATER
Monitor TV
(For RF Transmitter, select either
1. RF REMOTE Band 1, or
2. RF REMOTE Band 2)
b
RF antenna
r
(j) (j)--+l
+l=
::::::r.:=JJ----J
REC~VER ~!-P£_A;E_R+I-+I-
c ==C=::JDm-------I
IR repeaters -==-----+----Ht-iI"r"1..
AC adapter
IR OUT is free
IR IN
IR RECEIVER
(IR-9991-sold
separately)
(For IR Transmitter, select
"RF REMOTE OFF" only)
@@@@@@
©©Hgl©©©©
©©©©@@@@@.@@
!
@©>@@@@@@@@~
Connecting/II
rel!e~!f!E
o
Connect the fR repeater to the device as described in the
repeater's manual.
$
Connect the IR repeater cable(s) to the IR REPEATER OUT
jack(sl.
Shape of plug to be connected.
Notes
• IR repeaters send a signal similar to the device's own remote control
Xantech repeaters (models 282-00, 286-00, or 283-00) are compatible
with your new audio-video receiver.
Stereo mini plug
Sleeve
I
Tip
~~
Ring
Mono mini plug
Sleeve
I
Tip
==ac:=t==~
IR IN lOUT SPECIFICATION:
Connecting theRF
remoJf!ant~nna
o
Insert the jack of the provided RF remote antenna into the
RF REMOTE ANTENNA jack.
To Tip Signal Signal
$
Place the antenna wire verticallv and fix
it.
• Place the antenna away from the metallic panel
To Ring
To Sleeve
Ground
+
8V
Ground