Remote Control Unit (Rc-R0815) (Krf-X9060D) - Kenwood VR-6070 Instruction Manual

Names and functions ofparts
Remote control unit (RC-R0815) (KRF-X9060D)
(For the U.K. only)
This remote control unit can be used not only for Kenwood products but also for other non-Kenwood products by setting the appropriate manufacturer's
setup codes.
-CB::
o--.J-I----r-~
If the name of a function is different on
the receiver and on the remote control,
the name of the remote control key in
this manual is indicated in parentheses,
o
LCD (Liquid Crystal Display)
e
LEARN key
-mJ
Use to memorize the operation of the other
remote controls.
€) REMOTE MODE keys (DVD, CD, CBLISAT,
VCR, TV, OTHERS)
-Clil
Use to select the components registered at
the respective input.
e
Numeric keys
-CllJ
Provide functions identical to those of the
original remote control supplied with the com-
ponent you are controlling.
e
INPUT MODE key
-00
Use to switch between the full auto, digital
and analog input.
e
STEREO key
-00
Use to switch the listen mode to STEREO.
o
CH
+1-
keys
Use to select the channels.
~DVD~keys
When in DVD player operations, these keys
function as skip keys.
Q
TV CONTROL keys
Use when in TV operation.
o
TOP MENU key
Use to operate the DVD component.
SET UP key
-~
Use to select the speakers' settings etc.
e
Joystick
ENTER
Use to operate other components.
MULTI CONTROL
1..1"
-CUJ
Use to control a variety of settings.
Use to operate other components.
P,CALL
~
IDOWN ... and P.CALL/UP
~
.. -ell)
Use for selection adjustments during SOUND,
SET
UP
and PRESET channel functions.
o
PTYkey
-~
Use for PTY search,
PAGE DOWN
Use to operate the DVD component.
RDS DISP key
-eli:
Use to receive RDS broadcast.
PAGE UP
Use to operate the DVD component.
G
OSD key
Use to operate the DVD component.
e
TUNING ......
1....
keys
Use to operate the tuner mode.
If CD, MD or TAPE is selected as the input
source, these keys function as search keys.
ID
DISC SEl key
Use to operate other components,
INPUT SEL key
Use to operate other components.
e
DISC SKIP key
If CD is selected as the Input source, this key
functions as the multi-CD player disc skip key.
AlB key
,nAPE is selected as the input source, this is
A and B deck of a double cassette deck.
o
INPUT SELECTOR keys (DVD/6CH, CD/DVD,
PHONO, TUNER, VIDEO 1, VIDEO 2,
VIDEO 3,
MD/TAPE, AV AUXI
-00
Use to select the Input sources.
o
LOUDNESS key
-ell:
Use to switch the status of LOUDNESS.
o
SOURCE 6 key
Use to turn the other components ONIOFF
G
POWER 6 key
-m:;
Use to turn the receiver ON/OFF.
eI
RECEIVER key
Use to return to the operation of the receiver.
~
THX key
-OC
Use to switch the status of THX.
f1J
LISTEN MODE
61\7
keys
-IJ:§:)
Use to select the listening mode.
@) ACTIVE EO key
-C'll;
Use to select ACTIVE EO's setting,
fl) SPEAKER EO key
-Cll,
Use to select SPEAKER EO's setting.
$
DSP MODE key
-~
Use to select any of the DSP mode
f'1) MUTE key
-c::u:
Use to temporarily mute the sound
Qi
VOLUME
+1-
keys
-[]jJ
Use to adjust the receiver volume.
I!li
MENU key
Use to operate other components.
SOUND key
-Q§:
Use to adjust the sound quality and the ambi-
ence effects.
lii
RETURN key
Use to operate other components.
G .. III
key
If CD is selected as the input source, this key
functions as the play/pause key.
If MD orTAPE key is selected as input source,
this key functions as the play key.
BAND key
-:J.gJ
Use to select the broadcast band.
G ...
key
Use to operate other components
FLIP key
Use to operate other components
fj DIMMER key
-~
Use to adjust the brightness of the display.
II
key
Use to operate other components.
G.
key
If CD, MD, or TAPE is selected as the input
J
source, this key functions as the stop key.
AUTO key
-Q2:
Use to select the auto or manual tuning
mode.
~
TONE key -lJ].
Use to switch the status of TONE control.
@) BASS BOOST key
-c::u:
Use to select the maximum adjustment set-
ting for the low frequency range.