Collnecting The System Control - Kenwood VR-6070 Instruction Manual

Setting up the system
Connecting the system control
Connecting system control cords after connecting a KENWOOD
audio component system lets you take advantage of convenient
system control operations.
This unit is compatible only with the [SL-161 mode. The system
control operation is not
avail~ble
if the unit is connected in the
[XS8l, [XSl, or (XRl connection mode.
If your component has the mode select switch, set the connected
components to the [SL16] mode.
~ f--==e:=IJm=
l5l.l6J
SYSTEM CONTROL
©
cord
• You may connect the system control cord to either the up or down
Jack
EXAMPLE: [SL 16] mode connections
The underlined portion represents the setting of the system control
mode.
SYSTEM CONTROL OPERA TlONS
Remote Control
Lets you operate this unit with the system remote supplied with the
receiver
Automatic Operation
When you start playback from a source component, the input selector
on this unit switches to that component automatically.
Synchronized Recording
Lets you synchronize recording with the start of playback when
recording from CD, MD or analog discs.
Registering setup codes for KENWOOD audio components
If you own remote controllable KENWOOD audio components that
are not compatible with system control, registering the setup code
enables you to control those components using the remote control
supplied with this unit (without connecting system control cords). To
register setup codes for your remote controllable KENWOOD audio
components, see" Registering setup codes for other components".
-CllJ
[SL16]
(SL161lXSl (XS81 (XRJ
[SL161 [XS] (XS81
[XS]
I
Receiver
I
Cassette deck
or MD recorder
I
CD player
I
Record player
I
SYSTEM
CONTROL
cord
• In order to take advantaye of the system control operations, the
cornponents must be connected to the correct jacks To use a CD
player it must be connected to the CD jacks To use a cassette deck
(or MD recorder) it must be connected to the MD/TAPE jacks When
uSing more than one CD player (etc.) only the one connected to the
specified jacks may be connected for system control.
• Some CD players and cassette decks are not compatible with the
[SL 161 system control mode Do not make system connections with
equipment that is not ISL 161 compatible.
• Some MD players are not system control compatible You cannot
make system control connections to this kind of equipment.
Notes
1 [SL 161 equipment cannot be combined with [XRI. IXSI. and IXS81
equipment for system operations. If your equipment consists of
this kind of combination, please do not connect any system con-
trol cords Even without system control cords, normal operations
can be carried out without effecting performance
2 Do not connect system control cords to any components other
than those specified by KENWOOD It may cause a malfunction
and damage your equipment.
3 Be sure the system control plugs are inserted allthe way in to the
system control terminals