Connecting The Rf Antenna, External Ir Receiver And External Ir Repeater - Kenwood VR-510 Instruction Manual

Connecting the RF antenna, external IR Receiver and external IR Repeater

The remote control for this receiver has the RF (radio frequency) and IR (infrared rays) transmission function. It enables
you to control the receiver not only by aiming at the receiver but also by aiming at the RF antenna as well as the external
IR receiver. In addition, you can enjoy a wider remote control signal range by placing the RF antenna and IR receiver
away from the receiver.
KENWOOD components (except DVD player) : System control
Other components: (Registering setup codes) IR REPEATER
IR REPEATER
(For RF Transmitter, select either
1. "RF Band 1" or
2. "RF Band 2" only)
IR OUT IR RECEIVER IN
LCD REMOTE DC 8V 17mA
ANTENNA
RF REMOTE
)
fl
Monitor TV
IR IN
RF antenna
Shape of plug to be connected.
IR Receiver IN
Stereo mini plug
IR IN / OUT SPECIFICATION:
Terminal
To Tip
To Ring
To Sleeve
Setting up the system
(For IR Transmitter,
select "RF OFF" only)
IR RECEIVER
AC adapter
(IR-9991- sold separately)
To AC
wall outlet
IR OUT is
free
IR OUT LCD
Remote
Mono mini plug
Sleeve
Tip
Ring
IR Receiver IN IR OUT LCD
Remote
Signal Signal
Ground
+ 8V Ground
17
Sleeve
Tip