Connecting The External Ir Repeater - Kenwood VR-7070 Instruction Manual

Setting up the system

Connecting the external IR Repeater

The remote control for this receiver has the IR (infrared rays) transmission function. IR repeaters enables you to control components located in cabinets
or behind glass doors. You can enjoy a wider remote control signal range by placing the IR repeater away from the receiver.
KENWOOD components (except DVD player): System control
Other components: (Registering setup codes) IR REPEATER
IR RECEIVER
(IR-9991-sold
separately)
IR OUT is free
Connecting IR repeater
1 Connect the IR repeater to the device as described in the
repeater's manual.
2 Connect the IR repeater cable(s) to the IR REPEATER OUT
jack(s).
Notes
• IR repeaters send a signal similar to the device's own remote con-
trol. Xantech repeaters (models 282-00, 286-00, or 283-00) are com-
patible with your new audio-video receiver.
18
EN
)
°
IR repeaters
AC adapter
To AC wall
outlet
IR IN
IR
IR
REPEATER
RECEIVER
OUT
IN
Shape of plug to be connected.
IR RECEIVER IN
Stereo mini plug
Sleeve
Ring
IR IN / OUT SPECIFICATION:
Terminal IR RECEIVER
To Tip Signal
To Ring Ground
To Sleeve + 8V
Monitor TV
IR REPEATER OUT
Mono mini plug
Sleeve
Tip Tip
IR REPEATER
IN OUT
Signal
Ground