Connecting The Rf Antenna And External Ir Repeater (For Vr-6060 Only) - Kenwood KRF-V8060D Instruction Manual

Setting up the system
Connecting the RF antenna and external IR Repeater
The remote control for this receiver has the RF (radio frequency) and IR (infrared rays) transmission function. IR repeaters enables you to control
components located in cabinets or behind glass doors. You can enjoy a wider remote control signal range by placing the RF antenna and IR repeater away
from the receiver.
KENWOOD components (except DVD player): System control
Other components: (Registering setup codes) IR REPEATER
IR repeaters
(For RF Transmitter, select either
1. RF REMOTE Band 1, or
2. RF REMOTE Band 2)
Connecting IR repeater
1 Connect the IR repeater to the device as described in the
repeater's manual.
2 Connect the IR repeater cable(s) to the IR REPEATER OUT
jack(s).
Notes
• IR repeaters send a signal similar to the device's own remote control.
Xantech repeaters (models 282-00, 286-00, or 283-00) are compatible
with your new audio-video receiver.
Connecting the RF remote antenna
1 Insert the jack of the provided RF remote antenna into the
RF REMOTE ANTENNA jack.
2 Place the antenna wire vertically and fix it.
• Place the antenna away from the metallic panel.
18 EN
(For VR-6060 only)
&
fl
IR REPEATER
OUT
RF REMOTE ANTENNA
Shape of plug to be connected.
IR REPEATER OUT
Mono Mini Plug
IR OUT SPECIFICATION:
Terminal
To Tip
To Sleeve
Monitor TV
RF antenna
Sleeve
IR REPEATER
OUT
Signal
Ground
Tip