Dvd 6-Channel Playback - Kenwood VR-6070 Instruction Manual

Ambience effects
Press the THX key to switch the following setting:
m
THXmode.
This mode creates a home theater environment which is able to
reproduce a cinema surround sound system featuring improved
special representation and acoustic imaging of surround channels by
translating THX Surround EX technology.
=
~tJEJElEJ
@
~1~E3E3E3
DVD/6CH
;IlV!?;!:!?11!1},'!!Le!!l~!ie!f:.';;";;i;';'lilJiI;"k,0;,_,..,,,,,,,,,..,_,,
. . " ,
Using a DVD player orthe like equipped with six
(5.l)
output channels and
the receiver, you can enjoy surround sound playback.
When you try to playa disc other than Dolby Digital such as DTS CD, no
sound is produced or, nOise may be heard. To avoid this situation. make
sure that you connect the component to the receiver's DVD/6CH INPUT
jacks through a surround processor which can decode the surround
signal you want to listen to.
Connecting a DVD player which can decode the surround signal itself is
also acceptable.
INPUT MODE VOLUME
CLL
Icb
o
~~~
80 0
~(OOO)
00
EI
THX Surround EX function IS turned ON
when Dolby Digital 51 ch signal is
detected.
(THX indicator lights up )
THX Surround EX function is turned ON
when Dolby Digital Surround EX signal is
detected.
(THX indicator lights up )
THX mode is turned ON
(THX indicator lights up )
THX mode is turned OFF.
(THX indicator goes off )
4
THX OFF
1
THX Sur EX ON
;>
THX Sur EX AUTO
3 THX ON
f"11:::'j:::'
(~:
I:::'''j''
..... ; I ',,,'1.,,, I
o
THX functions when the display segment is turned ON
o
THX Sur EX ON and THX Sur EX AUTO will not be available if
surround back speakers are turned OFF.
o
The THX setting differs depending on the input selector
o
Adjust the volume.
Notes
o
Depending on the type of the signal or speaker setting, some listening
modes cannot be selected.
o
When playback is started, the sound may be cut or interrupted before
the input source is confirmed as Dolby Digital.
o
To enjoy Dolby Digital surround (as well as all the other listening modes)
from a single component be sure to use a Dolby Digital compatible
source component.
o
Dialogue Normalization (Dial Norm) isa feature of Dolby Digital. It is able
to automatically maintain the overall audio output level constant. When
playing source material with Dolby Digital software encoding, a brief
message will appear
-~-'~--,
i
;
Preparations
o
Connect your DVD player to the DVD/6CH jacks ot the receiver.
o
Turn on all other components that will be used.
o
Complete" Preparing for surround sound".
-Clll
D
Press "OVO/6CH" as the input source.
o
If speaker system B is on when" DVD/6CH" is selected as the input
source, it switches off and speaker system A turns on automati-
cally.
This message informs you that the source material has been recorded at
a different level than usual. For example, "DIALNORM OFFSET +4 dB"
Will scroll across the display to Indicate that It had been automatically
adjusted to the normal output If this message does not appear, no
adjustment will be made.
m
Select "6CH INPUT" by pressing the INPUT MODE key.
m
Start playback o/the OVO software,
m
Adjust the volume.
o
It is not possible to adjust the volume level or sound quality (SET
UP, SOUND) of the channels separately when the receiver is in the
DVD/6CH mode. Adjust the volume with the controls of the DVD
player
For the powered subwoofer, you can adjust the volume of the
subwoofer using the subwoofer's own volume control.
37
EN