Ac Power Connection - Martin Acrobat User Manual

AC
POWER CONNECTION
The Acrobat's operating voltage is printed on the serial number label near the AC
input. Verify that the operating voltage closely matches the AC supply voltage
before applying power. Contact your Martin dealer if the operating voltage differs
from the supply voltage by more than five percent.
To inst all a plug on t he mains lead
The fixture's mains lead may require a grounding-type cord cap that fits your
power distribution cable or outlet. Consult a qualified electrician if you have
any doubts about proper installation.
Warning! For protection from dangerous electric shock, the fixture must
be grounded (earthed). The AC mains supply shall have
overload and ground-fault protection.
Important! Verify that the feed cables are undamaged and rated for the
current requirements of all connected devices before use.
• Following the cord cap manufacturer's instructions, connect the yellow and
green wire to ground (earth), the brown wire to live, and the blue wire to
neutral. The table below shows some pin identification schemes.
yellow/green
6
Wire
brown
blue

AC power connection

Pin Marking
live
neutral
ground
Screw color
"L" yellow or brass
"N" silver
green
Acrobat user manual
3