Download  Print this page


Start each treatment by selecting the light intensity very carefully,
based on your skin's sensitivity and on how comfortable treatment
Your skin may react differently on different days/occasions for a number of
reasons and especially after tanning. See section 'Possible side effects and
skin reactions' in this chapter for more information.
Press the % button to increase the intensity. To lower the intensity,
press the ^button.
Every time you press the button, the corresponding intensity
light starts to flash. This takes a few seconds.
Place the appliance at a 90° angle on the skin so that the attachment
and the safety ring are in contact with the skin.
Press the safety ring fully onto the skin with slight pressure.
Note: The safety ring has contact switches that together are the safety system
of the appliance. This safety ring prevents unintentional flashing without skin
, The 'ready to flash' light on the back of the appliance lights up green
when all contact switches of the safety ring are in contact with the
skin and the device is charged. This may take a few seconds.
Tip: For easier use, stretch the area of skin you want to treat. On areas with
softer skin, you may need to exert more pressure on the appliance to push in
all contact switches.



Table of Contents

   Related Manuals for Philips SC2003

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: