Connecting Power Supply; Turning On The Power - InFocus in5122 Quick Start Manual

Connecting power supply

1.
Put the connector of the power cord into the
AC IN (AC inlet) of the projector.
2.
Firmly plug the power cord's plug into an
electrical outlet. In a few seconds after the
power has been connected, the POWER
indicator will light up in steady orange.
Please remember that when the AC POWER ON
function is activated, connecting power will cause the
projector turn on.
WARNING ►Please use extra caution when connecting the power cord, as
incorrect or faulty connections may result in fire and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, consult
your dealer to get a new one.
• Only plug the power cord into an outlet with matching voltage. The power
outlet should be close to the projector and easily accessible. Remove the
power cord for complete removal of power.
• Never modify the power cord.

Turning on the power

1.
Make sure that the power cord is firmly and
correctly connected to the projector and the
outlet.
2.
Make sure that the POWER indicator is
steady orange. Then remove the lens
cover.
3.
Press the STANDBY/ON button on the
projector or the remote control.
The projection lamp will light up and the
POWER indicator will begin blinking green.
When the power is completely on, the
indicator will stop blinking and become
steady green.
WARNING ►A strong light is emitted when the projector's power is on. Do
not look into the lens of the projector or look inside of the projector through any
of the projector's openings.
NOTE • Power on the projector prior to turning on connected devices.
• The projector has a AC POWER ON function, which can make the projector
turn on automatically. For more information, please see the User's Manual.
8
AC IN
Power
cord
STANDBY/ON button
POWER indicator
STANDBY/ON SOURCE MENU
SECURITY
LAMP
TEMP
POWER