Turning Off The Power - InFocus in5122 Quick Start Manual

Displaying the picture (continued)
CAUTION ►If you want to display a blank screen while the projector's lamp
is on:
- Use the BLANK function (see User's Manual).
Taking any other action may cause the damage to the projector.
NOTE • The RESIZE button does not work when no proper signal is inputted.
• For the details of how to adjust the picture, please see User's Manual.

Turning off the power

1.
Press the STANDBY/ON button on the
projector or the remote control.
The message "Power off?" will appear
on the screen for about 5 seconds.
2.
Press the STANDBY/ON button again
while the message appears.
The projector lamp will go off, and the
POWER indicator will begin blinking in
orange. Then the POWER indicator will
stop blinking and become steady orange
after the lamp has cooled.
3.
Attach the lens cover, only after the
POWER indicator turns steady orange.
Do not turn the projector on for 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on. Such operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.
WARNING ►Do not touch any areas around the lamp door or the exhaust
vents during use or just after use, since it is too hot.
►Remove the power cord to remove power completely. The power outlet
should be close to the projector and easily accessible.
NOTE • Please power off the projector after all connected devices are powered
off.
• This projector has an AUTO POWER function that can make the projector turn
off automatically. For more information, please see User's Manual.
STANDBY/ON button
POWER indicator
STANDBY/ON SOURCE MENU
SECURITY
LAMP
TEMP
POWER
11