Elo TouchSystems ET3201L User Manual page 19

Selects which language the OSD information is displayed in. The available
OSD languages are: English, French, Italian, German, Spanish, Simplified Chinese,
Language
Traditional Chinese, and Japanese.
Default: English.
OSD Moves the OSD location left and right on the display.
H-Position Default: 50 (centered)
OSD Moves the OSD location up and down on the display.
V-position
Default: 50 (centered)
Selecting "Recall Defaults" restores all factory default settings for OSD-adjustable
Recalling
parameters (except OSD Language and OSD Position) and for Preset Video Mode
Defaults
timings.
This menu allows the user to switch between the serial protocol and the DDC/CI
MDC Protocol
protocol.
DDC/CI protocol is used to communicate to a host computer via the video signal.
Tabletop Enables or disables the Tabletop Thermal Protection Mode settings
Displays Monitor Information, System Temperature and Help & Support options.
Information
Nothing is adjustable in this menu.
Monitor Displays the touchmonitor model and the monitor and touchscreen serial #
Information information
Displays the real-time temperature of the Video Board
System
Note: Docking Board and the CPU Sensor temperatures are only available if these
Temperature
features are supported by the computer module.
Help & Display information regarding Elo Touch Solutions contact information.
Support
All touchmonitor adjustments made through the OSD are automatically memorized as soon as
they are entered. This feature saves you from having to reset your choices every time the
touchmonitor is unplugged or powered off and on or if there is a power failure.
OSD and Power Lockouts
Press and hold the "Menu" and ">" buttons for one seconds to enable/disable the OSD Locking
feature. When the OSD Locking is enabled, pressing any of the Menu, Up, Down, or Select
keys will have no effect on the system.
Press and hold the "Menu" and "<" buttons for one seconds to enable/disable the Power
Locking feature. When the Power Locking is enabled, pressing the power switch will have no
effect on the system.
User Manual: Interactive Digital Signage
SW601990 Rev F, Page 19 of 36