Elo TouchSystems ET3201L User Manual page 18

Allows fine adjustments of the panels pixel dot clock.
Clock
Not applicable when using HDMI/DisplayPort video or the Computer Module.
Allows fine adjustments of the panels pixel dot clock phase.
Phase
Not applicable when using HDMI/DisplayPort video or the Computer Module.
Moves the image horizontally on the display in single-pixel increments.
H-position Default: centered.
Not applicable when using HDMI/DisplayPort video or the Computer Module.
Moves the image vertically on the display in single-pixel increments.
V-position
Default: centered.
Not applicable when using HDMI/DisplayPort video or the Computer Module.
The user can choose between Standard, 5%, 10% or 15% black level offset.
The saturation level of the colors change according to the chosen black level offset.
Black Level
Not available when the video source is from VGA.
Selects the displays color temperature. The available color temperatures are 9300K,
7500K, 6500K, 5500K, and User Defined. If the User Defined option is selected, the
Color
user can change the color temperature by changing individual R, G, and B gains on a
Temperature
scale from 0 to 100.
Default: User Defined with R, G, and B all set to 100.
Allows the user to choose the audio source. The choices are From Video Source, Line
in and ECM Line-in (available only if an ECM is detected)
Audio Source
If there is no Computer Module plugged in, and the video source is HDMI, the options
are: Line In and HDMI.
Default: Line In.
The Color Temperature menu can be chosen or Hue and Saturation can be varied in
this menu.
Color Adjust
Color Temperature will only be available in the Standard color preference mode. Hue
and Saturation are available in the remaining color preferences.
Standard, Movie, Gaming, Photo modes can be chosen depending on the users
Color preference.
Preference Movie, Gaming and Photo mode allow the user to vary the Hue and Saturation
Default: Standard
OSD menu: The Horizontal position, vertical position and OSD timer can be changed
from here.
Language Settings can be changed
Recall Defaults: set the system back to the preset standards
Information: display information about the monitor and system
Other Menu MDC Protocol: allows the user to choose between DDC/CI and RS232 mode for the
MDC utility
Support & Help: Provide information about help and support
System Temperature: Provides the system Temperature information. If the Elo
computer module is inserted, there will be a secondary line showing that temperature
information.
Adjusts how long a period of OSD button inactivity the Touchmonitor will wait before
OSD Timer closing the OSD. The adjustable range is between 5 and 60 seconds.
Default: 15 seconds
User Manual: Interactive Digital Signage
SW601990 Rev F, Page 18 of 36