Service door
Description
Service door
Service door, RCTO
Before removing the service door, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Remove the service door:
1.
Turn the computer upside down on a flat surface, with the battery bay toward you.
2.
Slide the service door release latch to the left (1), and then remove the optional Phillips screw (if
the screw is being used) (2).
NOTE:
3.
Slide the release latch again (3) to release the service door.
Battery on page
If you want to use the optional screw, it is stored inside the service door.
32).
Component replacement procedures
Spare part number
738682-001
748357-001
33