Display Panel - HP mt41 Maintenance And Service Manual

Display panel

Description
Display bezel
Display panel, 14 in (35.56 cm), WLED, HD, AG, SVA, flat display panel
Before removing the display panel, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Remove the panel:
1. Open the computer with the display facing you.
2. Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of
the display bezel until the bezel disengages from the display enclosure.
3. Remove the display bezel (4).
1. Remove the four Phillips screws (1) that secure the display panel to the display enclosure.
CAUTION:
of tools, screws, and any other foreign objects. Failure to follow this caution can result
in damage to the display panel.
Battery on page
Before turning the display panel upside down, make sure the work surface is clear
32).
Component replacement procedures
Spare part number
738712-001
747751-001
49