General; If Use Hp Msm Controller Option Is Enabled; If Use Hp Msm Controller Option Is Disabled - HP MSM3xx Management And Configuration Manual

General

Availability of certain VSC features and their functionality are dependent on the setting of the
Use HP MSM Controller in the General box. This option determines how authentication
and access control are handled by the VSC.

If Use HP MSM Controller option is enabled

This creates an access-controlled VSC, which means that the AP must be used in
conjunction with a controller because the VSC is automatically configured to forward all user
traffic to the controller for authentication (Wireless protection and MAC-based
authentication options are forced to use the controller as the RADIUS server). Also, once
authenticated, user traffic is restricted by the Wireless security filters option. Only traffic
addressed to the controller is permitted. (These filters can be disabled if required.)
t
User
Autonomous AP

If Use HP MSM Controller option is disabled

This creates a non-access-controlled VSC, which allows the AP to operate independent of a
controller and manage user authentication itself using the services of a third-party RADIUS
server. Once authenticated, user traffic is restricted to the default gateway assigned to the AP
by the Wireless security filters option. (These filters can be disabled or re-configured if
required.)
t
User
Autonomous AP
Third-party
Controller
authentication
server
on
Third-party
authentication
server
Working with VSCs
VSC configuration options
Network
Network
Router
4-7