Ip Filter - HP MSM3xx Management And Configuration Manual

Working with VSCs
VSC configuration options
When both this option and the MAC-based authentication options are enabled, the following
applies: if a user's MAC address does not appear in the MAC filtering list then MAC-based
authentication takes place for that user.
Specify the MAC address as six pairs of hexadecimal digits separated by colons; for example,
00:00:00:0a:0f:01.
Filter behavior:
 Allow: Only client stations whose MAC addresses appear in the MAC address list can
connect to the wireless network.
 Block: All client stations whose MAC addresses appear in the MAC address list are
blocked from accessing the wireless network.

IP filter

The IP filter enables you to block wireless-to-wired LAN traffic on this VSC based on its
destination address.
Specify the list of destination IP addresses for which traffic will be accepted. All other traffic
will be blocked. Up to 64 IP addresses are supported.
The IP filter does not block the following:
 DNS queries (i.e., TCP/UDP traffic on port 53)
DHCP requests/responses

4-20