Summary - HP MSM3xx Management And Configuration Manual

Summary

The operational differences between the two modes are summarized in the following table.
Feature/function
Reset AP to factory default
settings
Network connection
(Ethernet)
Centralized configuration/
software management
Configuration changes
Remote configuration and
management
Local mesh groups
(wireless links)
Wireless mobility support
using Mobility Traffic
Manager
Centralized access control
LLDP
sFlow
STP
Controlled mode AP
AP remains in controlled
mode.
Supported on Port 1 only.
Fully automated using the
management tool on a
controller. Allows APs to be
configured individually or in
groups.
Performed using the
management tool on a
controller. Multiple APs can
be updated at the same
time.
Automatic establishment of
a secure tunnel to protect
management and control
traffic.
Dynamic links.
Supported (with the
appropriate license).
Supported.
Supported.
Supported.
Disabled by default.
Introducing the MSM3xx/4xx Access Points
Autonomous mode AP
AP changes from autonomous
to controlled mode.
Supported on Port 1 and Port 2
(if available).
New configuration/software can
be downloaded from a central
location at a preset day and
time.
Performed locally using each
the management tool on each
AP.
Via secure HTTPS browser
session.
Dynamic and static links.
Not supported.
Not supported.
Supported.
Not supported.
Enabled by default.
Introduction
1-9