Hard Drive - HP EliteBook 2760p Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kits include the bracket and the screws.
Description
320 GB, 7200 rpm, 7 mm (2.5 in) SED hard drive
320 GB, 7200 rpm, 7 mm (2.5 in) hard drive
250 GB, 7200 rpm, 7 mm (2.5 in) hard drive
160 GB solid-state drive (SSD)
128 GB SSD
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Remove the battery (see
b. Remove the service access cover (see
Remove the hard drive:
1. Loosen the Phillips M2.5×8.0 captive screw (1) that secures the hard drive bracket to the
computer.
2. Grasp the tab on the hard drive and slide it forward to disconnect the hard drive.
46 Chapter 4 Removal and replacement procedures
Battery on page 41)
Service access cover on page
Spare part number
656621-001
656620-001
656619-001
653018-001
653017-001
42)