Secondary Memory Module - HP EliteBook 2760p Maintenance And Service Manual

8. Release the ZIF connector to which the pointing stick cable is attached, and then disconnect the
cable (4) from the keyboard.
9. Remove the keyboard.
Reverse this procedure to install the keyboard.

Secondary memory module

Description
1 GB (PC3-10600, 1333 MHz, DDR3)
2 GB (PC3-10600, 1333 MHz, DDR3)
4 GB (PC3-10600, 1333 MHz, DDR3)
8 GB (PC3-10600, 1333 MHz, DDR3)
Before removing the memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Remove the battery (see
b. Service access cover (see
c. Remove the keyboard (see
56 Chapter 4 Removal and replacement procedures
Battery on page 41)
Service access cover on page
Keyboard on page 53)
Spare part number
639738-001
621565-001
621569-001
634091-001
42)