Primary Memory Module - HP EliteBook 2760p Maintenance And Service Manual

Primary memory module

Description
1 GB (PC3-10600, 1333 MHz, DDR3)
2 GB (PC3-10600, 1333 MHz, DDR3)
4 GB (PC3-10600, 1333 MHz, DDR3)
8 GB (PC3-10600, 1333 MHz, DDR3)
Before removing the memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Remove the battery (see
b. Remove the service access cover (see
Remove the primary memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
2. Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE:
memory module slot.
Battery on page
Memory modules are designed with a notch (3) to prevent incorrect insertion into the
41)
Service access cover on page
Component replacement procedures
Spare part number
639738-001
621565-001
621569-001
634091-001
42)
43