Table of Contents
Advertisement
A Operation Lock Icon
Appears when the operation lock feature is
turned on.
(A P48 [About the Operation Lock Feature] )
B Voltage/Battery Power
Displays the current status of the power supply
in use.
(A P32 [Power Status Display] )
Memo :
Displayed in the Display 0 and Display 1 screens
0
during warnings only.
C Remaining Space on Media
Displays the remaining recording time of the SD
cards in slot A and slot B separately.
: Currently selected slot. (White card)
W
W z : Write-protect switch of SD card is set.
: SD card cannot be read or
W!INVALID
: SD card requires
W!FORMAT
: SD card requires
W!RESTORE
:
W!INCORRECT
When [Rec Mode] is set to other than
0
"AVCHD"/"SD"/"Web" with a Class 4 SD
card inserted.
When the SD card is not supported.
0
W!REC INH
:
When attempting to record in 50p or 50i to
0
an SD card recorded in [AVCHD]60p or
60i (or vice versa).
When attempting to record a large clip
0
while a media that does not support large
clip recording is inserted.
(A P136 [ 4GB File Spanning(SDXC) ] )
When an SD card lower than Class 10 is
0
inserted while in the XHQ mode.
Display Screen in Camera Mode
146
written to, or restored.
formatting.
restoring.
The following icons are displayed during FTP
upload.
(A P180 [Uploading a Recorded Video Clip] )
Icon
FTP transfer is in progress.
Three images are alternately
displayed, and the arrows
become animated. In this case,
instead of the recordable time of
the SD card, an estimated value
of the remaining transfer time is
displayed.
Error has occurred during FTP
transfer.
(Yellow)
Memo :
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [Media
Remain] is set to "Off". However, warnings will
be displayed.
(A P123 [ Media Remain ] )
Displayed on the Display 0 and Display 1
0
screens only in the case of warnings. (When the
remaining time is shorter than 3 minutes)
The icons appear on all display screens in the
following cases.
When recording is performed to only one of
0
the slots while [System] B [Record Set] B
[Slot Mode] is set to "Dual".
(A P136 [ Slot Mode ] )
When recording is performed to only one of
0
the slots while [System] B [Record Set] B
[Record Format] B [System] is set to "HD
+SD" or "HD+Web".
(A P132 [ System ] )
The displayed time is an estimate.
0
D Frame rate C D
Frame rate/SDI IN A B
Displayed as xx/yy fps (xx: recording frame
0
rate, yy: playback frame rate) only when [Rec
Mode] is set to "Variable Frame".
(A P135 [ Rec Mode ] )
"SDI IN Z" is displayed when a device is
0
connected to the [SDI IN] terminal, and
[System] B [Record Set] B [Record
Format] B [System] is set to "HD(SDI In)" or
"SD(SDI In)".
(A P132 [ System ] )
Status
Advertisement
Table of Contents
