Using The Histogram; Recording Simultaneously At Two Different Definitions - JVC GY-HM890e Instructions Manual

Using the Histogram

The histogram shows the brightness distribution,
and is employed mainly for checking the exposure
of the image.
1 Set the histogram feature to ON.
Set [Main Menu] B [LCD/VF] B [Display
0
Settings] B [Histogram] to "On".
You can also press the user button that is
0
assigned with "Histogram".
(A P111 [User Switch Set Item] )
2 Set the upper and lower limits of the
histogram display.
After setting, the brightness level is displayed in
red color.
Item Settings
Top Sets the maximum
brightness limit for
changing the
histogram display
color
Bottom Sets the minimum
brightness limit for
changing the
histogram display
color
o When the upper limit is set to 110% and the lower
limit to 0%
282min 282min
100min 100min
50min 50min
* The area in red is not displayed.
o When the upper limit is set to 90% and the lower
limit to 10%
282min 282min
100min 100min
50min 50min
Bottom
Top
How to read the histogram
The vertical axis denotes the number of pixels.
0
The horizontal axis denotes the pixel
0
brightness.
Using the Histogram
84
Options
5% to 110% (in 5 %
increments)
0% to 105% (in 5 %
increments)
00:00:00.00 00:00:00.00
Jan 24,2014 Jan 24,2014
12:34:56 12:34:56
5. 5.6 f t
ND 1/64 ND 1/64
AE+6 AE+6
0dB 0dB
F1.6 F1.6
P 13000K P 13000K 1/100 1/100
00:00:00.00 00:00:00.00
Jan 24,2014 Jan 24,2014
12:34:56 12:34:56
5. 5.6 f t
ND 1/64 ND 1/64
AE+6 AE+6
0dB 0dB
F1.6 F1.6
P 13000K 1/100 1/100
Recording
Simultaneously at Two
Different Definitions
By setting [System] to "HD+SD" or "HD+Web", you
can record simultaneously at two different
definitions.
When HD+SD is selected:
0
Records a high-definition (HD) file to slot A and
a standard definition (SD) file to slot B at the
same time.
When HD+Web is selected:
0
Records a high-definition (HD) file to slot A and
a low bit-rate web file to slot B at the same time.
Web files can be used as a proxy file for the HD
file.
Memo :
If a recordable SD card is inserted into only one
0
of the slots, files will only be recorded to that slot.
The [Rec Mode] is fixed at "Normal".
0
Clip Cutter Trig is disabled.
0
[Slot Mode] cannot be selected.
0
Clip Review can only be performed for slot A.
0
("No Media" appears if there is no card in slot A
while a card is inserted into slot B.)
Playback of web files is only possible from slot
0
B when "HD+Web" is selected.