Table of Contents
Advertisement
Memo :
You can specify whether to display the time
0
code, user's bit, or turn off the display in
[LCD/VF] B [Display Settings] B [TC/UB].
This item will not be displayed when "Off" is
selected.
(A P123 [ TC/UB ] )
Z Time Code Lock Indicator
When the built-in time code generator is
synchronized to the external time code data
input during the synchronization of time code
with another camera recorder, Z lights up.
(A P78 [Synchronizing the Time Code with an
External Time Code Generator] )
a Live streaming mark
When [Main Menu] B [System] B [Network]/
[Settings] B [Live Streaming Set] B [Live
Streaming] is set to "On", the distribution status
is displayed.
(A P138 [ Live Streaming ] )
Icon
Distribution in progress
0
(good connection quality)
Blinks when distribution
0
(Red)
starts or stops
Distribution in progress (poor
connection quality)
(Red)
Waiting for connection (during
RTSP/RTP) or connection failed
(Yellow)
b Event/Warning Display Area
Displays error messages.
(A P202 [Error Messages and Actions] )
c Media Status
----
: A card is not detected in the
selected slot, and [Tally
System] is also not set to
"Studio"
(A P130 [ Tally System ] )
STBY
: Recording standby
: Recording
RREC
REVIEW
: Clip Review
(A P83 [Viewing Recorded Videos Immediately
(Clip Review)] )
STBY P
: Pre Rec recording standby
(A P89 [Pre Rec] )
: Pre Rec recording
RRECP
(A P89 [Pre Rec] )
STBY C
: Clip Continuous Rec recording
standby
(A P89 [Clip Continuous Rec] )
Display Screen in Camera Mode
150
Status
: Clip Continuous Rec recording
RRECC
(A P89 [Clip Continuous Rec] )
STBYC
: Clip Continuous Rec recording
pause
(displayed in
yellow)
(A P89 [Clip Continuous Rec] )
STBY N
: Interval Rec recording standby
(A P92 [Interval Rec] )
STBYN
: Interval recording pause
(displayed in
red)
: Interval Rec recording
RRECN
(A P92 [Interval Rec] )
STBY M
: Frame Rec recording standby
(A P91 [Frame Rec] )
: Frame Rec recording
RRECM
(A P91 [Frame Rec] )
STBYM
: Frame Rec recording pause
(displayed in
yellow)
(A P91 [Frame Rec] )
STOP
: Unable to record to the card in
the slot
P.OFF
: Power OFF
: During clip cutter recording
Q
(displayed for 3 seconds)
(A P85 [Splitting the Clips Freely (Clip Cutter
Trig)] )
CALL
: Receiving call signals from an
external device, such as a
remote control unit
PGM
: Receiving program signals
from an external device, such
as a remote control unit
PVW
: Receiving preview signals
from an external device, such
as a remote control unit
d Dual Rec/Backup Rec Display
"DUAL" is displayed in the Dual Rec mode and
"BACKUP" is displayed in the Backup Rec
mode.
(A P136 [ Slot Mode ] )
Memo :
This item is not displayed when [Slot Mode] is
0
set to "Series".
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [Media
Remain] is set to "Off". However, warnings will
be displayed.
(A P123 [ Media Remain ] )
e OK Mark
Displayed when OK mark has been appended.
(A P99 [Appending/Deleting OK Mark] )
Advertisement
Table of Contents
