Setting The User's Bit - JVC GY-HM890e Instructions Manual

Setting the User's Bit

You can add the date, time or an 8-digit
hexadecimal number as the user's bit to the
recorded image.
Selecting a Recording Mode
Recording date/time information to the user's
bit
1 Set [Main Menu] B [TC/UB] B [UB Mode] to
"Date" or "Time", and press the Set button
(R).
(A P119 [ UB Mode ] )
The date or time information is recorded to the
user's bit.
Memo :
When "Date" or "Time" is set, [Preset] appears
0
as "-" and cannot be set.
"Time" is displayed in the 24-hour format.
0
Presetting the User's Bit
Recording arbitrary information (8-digit
hexadecimal) to the user's bit
1 Set [Main Menu] B [TC/UB] B [UB Mode] to
"SW Set", and press the Set button (R).
(A P119 [ UB Mode ] )
Setting the User's Bit
76
2 Move the cursor to [Preset] and press the
Set button (R).
The [UB Preset] setting screen appears.
TC/UB
UB Mode
Preset
Memo :
When the [TC GENE.] switch is set to "REGEN",
0
"Regen" is displayed and preset is disabled.
3 Use the cross-shaped button (HI) to place
the cursor at the item to set, then use the
cross-shaped button (JK) to change the
values.
Numbers between 0 and 9 or alphabets
between A and F can be specified for the user's
bit.
TC/UB
Memo :
Press the [MARKER/2] button to reset each digit to
0
"0". The cursor moves to the left.
4 Check the values and press the Set button
(R).
The user's bit is set and the screen returns
0
to [TC/UB].
To cancel the setting, press the [CANCEL]
0
button.
5 Press the [MENU] button.
Returns to the normal screen.
2
Cursor