Table of Contents
Advertisement
Symptom
Incorrect display on the
viewfinder.
The actual recording time is
shorter than the estimated
time.
The two camera recorders are
not synchronized even though
the time codes have been
synchronized. (Z on the Slave
device is not displayed.)
Cannot connect to wireless
LAN.
The View Remote screen turns
black.
The screen flickers.
The screen freezes.
Cannot perform remote
operation.
The clips cannot be uploaded
to the FTP server.
The wireless LAN is
disconnected.
GPS signal cannot be
received.
The position is not accurate.
Troubleshooting
208
Is the LCD monitor used with [LCD/VF] B [LCD + VF] set to "Off"?
0
(A P120 [ LCD + VF ] )
The recordable time may be shorter depending on the shooting
0
conditions or the subject.
Is the [TC GENE.] switch set to "FREE"?
0
(A P78 [Synchronizing the Time Code with an External Time Code
Generator] )
Set [System] B [Record Set] B [Record Format] B [WFrame & Bit
0
Rate] such that the two camera recorders have the same frame rate.
(A P133 [ W Frame & Bit Rate ] )
Check the mode of connection and method of setting ([SSID] and
0
[Passphrase] in cases other than WPS).
(A P175 [Connecting via Wireless LAN] )
Even if the Passphrase is wrong, "Completed the Setup Wizard.
0
Please Input the Passphrase into Your Device." may appear at the
browser setting depending on the type of encryption.
Adjust [Passphrase] again.
The network path is congested.
0
Wait a while before refreshing (reloading) the web browser.
The problem may be resolved by clearing the web browser cache.
0
Adjust the [Clip Server] settings.
0
(A P140 [ Clip Server ] )
The maximum size of the recorded clip is 64 GB.
0
If a file size limit is set in the FTP server settings, set the size limit to
more than 64 GB.
Take necessary action as described in "[List of FTP Transfer
0
Errors] P 203".
The wireless LAN may be disconnected depending on the
0
environment. Change the usage environment.
Connect via wired LAN.
0
(A P177 [Connecting via Wired LAN] )
Signal reception from GPS satellites may be affected by buildings or
0
trees.
Perform positioning preferably at an unobstructed location with a clear
view.
Radio wave reception may be affected by weather conditions such as
0
on a cloudy or rainy day.
The precision error may be up to hundreds of meters if the GPS signal
0
is weak or reflected off surrounding buildings.
Action
Advertisement
Table of Contents
